Siemens Plant Central Clock TC100 - Manual (Page 54)

Configuration Tool
7-5 © Siemens AG 2010 All Rights Reserved
SICLOCK ® TC100 Operating Instructions
Parameter tree Tree display of parameters
The parameters are subordinated in the trees of the individual menus and
submenus.
Online mode:
In online mode, you can open a context menu with a right mouse click on the
parameter / entry. The following functions are available:
• Read individual parameters
• Write individual parameters
• Set parameters to factory settings
See Reading / writing parameters, setting to factory defaults
(Chapter 7.3.4).
Icons:
• Write protection – the parameter cannot be edited
The current authorization level does not allow write access to this
parameter.
• Master level
The current authorization level allows reading, editing and writing of the
parameter.
• Master level without upload– operationally critical parameter
The current authorization level allows reading, editing and writing of the
parameter.
In order to change such parameters in the device, you have to select the
parameter explicitly and write it individually.
See Reading / writing parameters, setting to factory defaults
(Chapter 7.3.4)
• Display parameters
Display parameters can only be read, and are typically actual values.
In order to update the display of actual values, activate automatic update
.
• Entry – this is a parameter entry
Parameter Table Tabular display of the parameters
You can edit the parameter values in this display, see Editing parameters
(Chapter 7.3.3).
Online mode:
In online mode, you can open a context menu with a right mouse click on the
parameter/entry. The following functions are available:
• Read individual parameters
• Write individual parameters
• Set parameters to factory settings
See Reading / writing parameters, setting to factory defaults
(Chapter 7.3.4).
Table 7-3 Possible operations and displays in the Parameter tab
Field / button Meaning / instruction