Sun Microsystems Sun PCI High Speed Quad Port Serial Interface Adapter 819-1207-11 - Manual (Page 36)

16 Sun PCI High Speed Quad Port Serial Interface Adapter User’s Guide • May 2010
b. Edit the client’s /etc/hosts file and add the server site local hosts.
Note – Both IP addresses have to be on the same subnet.
Refer to the hosts(4) man page and the sample /etc/hosts files:
5. Edit the /etc/netmasks file as follows:
6. Start the PPP connection by typing the following commands:
#Server site (/etc/hosts) # Client site (/etc/hosts)
#======================= #=======================
#local #local
192.10.10.10 qa8a-hihp0 192.10.10.20 qa1b-hihp0
193.10.10.10 qa8a-hihp1 193.10.10.20 qa1b-hihp1
194.10.10.10 qa8a-hihp2 194.10.10.20 qa1b-hihp2
195.10.10.10 qa8a-hihp3 195.10.10.20 qa1b-hihp3
#remote #remote
192.10.10.20 qa1b-hihp0 192.10.10.10 qa8a-hihp0
193.10.10.20 qa1b-hihp1 193.10.10.10 qa8a-hihp1
194.10.10.20 qa1b-hihp2 194.10.10.10 qa8a-hihp2
195.10.10.20 qa1b-hihp3 195.10.10.10 qa8a-hihp3
192.10.10.0 255.255.255.0
193.10.10.0 255.255.255.0
194.10.10.0 255.255.255.0
195.10.10.0 255.255.255.0
/etc/rc2.d/S47pppd stop
/etc/rc2.d/S47pppd start