Sun Microsystems Sun PCI High Speed Quad Port Serial Interface Adapter 819-1207-11 - Manual (Page 33)

Chapter 3 SunHSI PCI Software Installation 13
2. Log in as superuser or change to superuser.
You must possess superuser privileges to invoke the following commands. This
ensures that all preinstallation scripts in the software package will be executed
with superuser privileges.
3. Using the pkgadd command, install the software packages as follows:
where download-directory is the name of the directory where the SunHSI software was
downloaded.
a. Type all or leave blank then press the Return key to continue the
installation of the driver software.
If the pkgadd utility warns you that some scripts must be executed with
superuser permissions, type y.
4. After successful completion of the package installation, reboot the system
using the reconfigure option.
a. Synchronize the hard disks and halt the system, using the following
commands.
b. At the ok prompt, type the boot command with the -r option:
# /usr/bin/su
Password: superuser-password
# pkgadd -d / download-directory/sunhsip_3_1/Product
The following packages are available:
SUNWhsip SunHSI/P Driver for PCI 3.1,REV=2005.xx.xx
SUNWhsipm SunHSI/P Man pages for PCI 3.1,REV=2005.xx.xx
SUNWhsipu SunHSI/P Utilities for PCI 3.1,REV=2005.xx.xx
Select package(s) you wish to process (or ‘all’ to process
all packages). (default: all) [?,??,q]: all
# /usr/sbin/sync
# /usr/sbin/halt
ok boot -r