Smeg AP91VJME - Manual (Page 15)

Instruction for the user
17
5 DESCRIPTION OF FRONT PANEL CONTROLS
All the oven controls are grouped together on the front panel. The table below provides a description
of the symbols used.
FRONT RIGHT BURNER FRONT CENTRAL BURNER
BACK RIGHT BURNER CENTRAL BURNER
BACK LEFT BURNER GAS OVEN THERMOSTAT KNOB
FRONT LEFT BURNER OVEN LIGHT / ROTISSERIE / GRILL
SWITCH
BACK CENTRAL BURNER BURNER IGNITION BUTTON
OVEN LIGHT SWITCH
If the cooker is equipped with an electronic programmer, before using the oven make sure
that the symbol
; appears on the display. See paragraph “8.1 Clock adjustment”.
COOKING HOB BURNER COMMAND KNOB
(CERTAIN MODELS ONLY)
The flame is lit by pressing the knob and turning it
anticlockwise to minimum flame / . To adjust the
flame turn the knob between maximum ( / ) and
minimum ( / ). The burner goes out when the knob
is returned to the position .
BURNER IGNITION BUTTON
(CERTAIN MODELS ONLY)
In the models fitted with this button, the flame is ignited by turning
the knob anticlockwise to the minimum flame setting / , while
simulta-neously pressing this button. To adjust the flame, turn the
knob to the zone between the maximum ( / ) and the minimum
( / ) settings. To turn out the burner, return the knob to the
position.