Samsung NC10 - Manual (Page 8)

3-8
3. Disassembly and Reassembly
- 이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다 -
- This Document can not be used without Samsung's authorization -
NC10
Part Picture Description
LCD
Ass'y
29. Remove the Tape inside the circle.
30. Pull the LCD cable up to the arrow direction and then
separate it.
21-2. Method to disassemble LCD without disassembling
Main System. As shown in the picture, Stand the Top
Ass’y in a vertical direction. remove 4 Rubber-LCD-
Cap and 4 screws
M2 X L4 (4EA)
22-2. Insert your hand into the gap of the LCD Back and the
LCD front and then separate first, the upper part of the
LCD Front and second, the both sides of the LCD Front
then finally the bottom part of it. After that, remove
screw(4ea) as shown in the picture.
M2 X L4 (4EA)
22-3. As shown in the picture, LCD can be disassembled
from LCD Cable and Camera moduel also can be
disassembled.
LCD Cable and Camera moduel disassembling method
refer to No 28.
Winchester_NC10_Eng.indb 8 2008-09-20 오후 1:36:56