Disassembly and reassembly – Samsung NC10 User Manual

Page 2

3-2

3. Disassembly and Reassembly

- 이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다 -
- This Document can not be used without Samsung's authorization -

NC10

Part

Picture

Description

Main

System

6. Remove the memory by pushing the fixed-tap out.

7. Push the Hook up inwards by using a pin-set as shown in

the picture, and then lift the key board up.

[Notice]
When you push the hook up, you have to be careful not to

scratch Topdp.

As shown in the picture, lift the top side of keyboard up and

then disassemble keyboard.

8. Lift the Keyboard up, and then take the FPC out after

lifting the Connector Lock.

Take Keyboard FPC cable out after opening Keyboard

connector Lock.

Winchester_NC10_Eng.indb 2

2008-09-20 오후 1:36:13