Disassembly and reassembly – Samsung NC10 User Manual

Page 3

3-3

3. Disassembly and Reassembly

- 이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다 -
- This Document can not be used without Samsung's authorization -

NC10

Part

Picture

Description

Main

System

9. As shown in the picture, separate the BOTTOM-

COVER(LAN Connector side first) by widening the gap

between the BOTTOM-COVER and the TOP. (Be careful

not to make scratch in the gap using a wooden-driver.)

As shown in the picture, separate the BOTTOM-COVER

by widening the gap between the BOTTOM-COVER and

the TOP. (Be careful not to make scratch in the gap using a

wooden-driver.)

10. After removing the Screw for fixing HDD remove the

INSULATOR by lifting the HDD up to about 70 degrees

direction.

[Notice]
When you life the HDD up, you shall not enforce excessive

strength.

11. Speaker CONN. INT Mic CONN., Power S/W CONN.

Touch-Pad FPC.

Winchester_NC10_Eng.indb 3

2008-09-20 오후 1:36:22