Ee “self-timer” on, See “multiple shots – Sanyo MIRRO PLS-3810 User Manual
Page 77
Ca
m
e
ra
67
ⅷ
CameraSettings
to select
Resolution
,
Quality
, and other
settings. (See “Camera Settings” on page 68.)
ⅷ
Review Media
to go to the In Phone folder to review your saved
pictures.
ⅷ
Key Guidance
to show keypad shortcuts in camera mode.
ⅷ
User Settings
to provide convenient access to your favorite
settings. (See “Saving Your Settings” on page 68.)
Self-timer
1.
From camera mode, press
OPTIONS
(right softkey)
>
Self-Timer
.
2.
Highlight a delay time (
10 Seconds
or
5 Seconds
) and press
.
3.
Press
or
START
(left softkey) when you are ready to start
the timer. (You will see
at the top of the screen and your
phone will beep during the countdown.)
4.
Get ready for the picture. (When the timer is down to three
seconds, the self-timer icon will turn red and the beep sound
will change.)
To cancel the self-timer after it has started:
ᮣ
Press
CANCEL
(right softkey) or
.
Multiple Shots
This feature allows you to take three, six, or nine shots in a
continuous sequence. When you take multiple shots,
will be
displayed in the viewfinder.
1.
From camera mode, press
OPTIONS
(right softkey)
>
Fun Tools > Multiple Shots
.
2.
Highlight an option (
3 Shots
,
6 Shots
, or
9 Shots
) and press
.
3.
Highlight the duration of the interval between shots (
Normal
or
Fast
) and press
.
4.
Press , ,
CAPTURE
(left softkey), or the side camera
button to take the pictures. (The MULTIPLE SHOTS folder will
display up to nine miniature thumbnail pictures per screen.)
Note
When taking multiple shots, the resolution is temporarily
set to Low-240x320.