Sanyo MIRRO PLS-3810 - Manual (Page 30)

20 2A. Phone Basics
Dialing From the Contacts List
1. From standby mode, press CONTACTS (right softkey).
2. Highlight the entry you want to call.
3. Press to dial the entry’s default phone number.
– or –
Press the navigation key left or right to show another number
for the entry and press
.
Plus (+) Code Dialing
When placing international calls, use Plus Code Dialing to
automatically enter the international access code for your
location. (This feature is subject to network availability.)
1. Press and hold to display “ + ” on your phone screen.
2. Dial the country code and phone number you’re calling, and
press
. The access code for international dialing will
automatically be dialed, followed by the country code and
phone number.
Speed Dialing
You can store up to 98 numbers in your phone’s speed dial
memory to make contacting friends and family easier.
You must assign a speed dial number to the existing phone
number beforehand. See “Assigning Speed Dial Numbers” on
page 51.
To use speed dial for locations 2-9:
ᮣ From standby mode, press and hold the appropriate key for
approximately two seconds.
To use speed dial for locations 10-99:
ᮣ From standby mode, press appropriate keys, and then

press .
The display confirms that the number has been dialed when it
shows “Connecting...”.
Note Speed dialing may not be available when you are roaming;
when you are roaming off the home network, you must
always dial using 11 digits (1+ area code + number).