Sanyo MIRRO PLS-3810 - Manual (Page 38)

28 2B. Settings
Changing the Backlight Time Length
Select how long the main screen and keypad remain backlit after
any keypress is made.
ᮣ Press > Settings > Display > Backlight > Backlight Dim
or Backlight Off.
Ⅲ If you select Backlight Dim , select Always Bright ,

Always Dim , or a preset length of time to elapse before

the screen backlight dims.
Ⅲ If you select Backlight Off , select a preset length of time to
elapse before the screen and keypad backlights turn off.
(When you select
Always Bright for the Backlight Dim
setting above, the keypad backlight will turn off after about
one minute.)
Selecting a Picture ID
You can select an image as a picture ID.
1. Press > Settings > Display > Picture ID .
2. Select Contacts , Unsaved Numbers , or Private / Unknown .
Ⅲ If you select Contacts , select All Contacts , or select 
One Contact and then select an entry.
3. Select a picture ID option by pressing the navigation key up
or down, and then select an image.
Ⅲ If you select Take New Picture , press to take a picture.
4. If you are satisfied with the image on the preview screen,
press .
Power Save Mode
This feature helps conserve your battery power by automatically
adjusting settings for certain phone features.
1. Press > Settings > Display > Power Save Mode .
2. Select On . (Select Off to deactivate this feature.)
3. Read the message and press CONTINUE (left softkey).
Changing the Clock/Calendar Display
Choose which design of clock or calendar you want to display in
standby mode.
1. Press > Settings > Display > Clock/Calendar .
2. Highlight a display option and press .
Note Long backlight settings reduce the battery’s talk and
standby times.