Sony KP-41T35 - Manual (Page 17)

17 -EN Getting Started
EN
Setting cable TV on or off
If you have connected the projection TV to a cable TV
system, set CABLE to ON (the factory setting). If not,
set CABLE to OFF.
You do not have to do this procedure if you perform
AUTO SET UP (page 14). Do this procedure only when
you want to set it manually.
1
Press MENU.
2
Press V or v to select , and press .
3
Set CABLE to ON or OFF:
(1) Press V or v to move the cursor (z) to CABLE,
and press .
(2) Press V or v to select ON or OFF, and press .
4
Press MENU to return to the original screen.
Note
• If CABLE appears in gray, the projection TV is set to a video
input and you cannot select CABLE. Press TV (black button) so
that a channel number appears.
SET UP
CHANNEL ERASE/ADD
CHANNEL CAPTION
CHANNEL BLOCK
FAVORITE CHANNEL
CABLE : OFF
AUTO PROGRAM
CC CONVERGENCE
MENU
VIDEO LABEL
LANGUAGE : ENGLISH
Use Exit MENU
RED
BLUE
MENU
CONVERGENCE
+
+
Us e E x MENU i t RETURN
Us e E x MENU i t
RED
BLUE
MENU
CONVERGENCE
+
+
RETURN
4
Press V, B, v, or b to move the cursor (z) to
the symbol showing the line you want to
adjust, and press
.
+RED : Red vertical and horizontal line (left/right/up/
down adjustment)
+BLUE : Blue vertical and horizontal line (left/right/up/
down adjustment)
5
Press V, B, v, or b to move the line until it
converges with the center green line, and
press
.
6
Repeat steps 4 and 5 to adjust the other
lines until all three lines converge and are
seen as a white cross.
7
Press MENU to return to the original screen.
R
G
B
B
G+R
To move Press
Up V
Down v
Right b
Left B