Savin 3370 User Manual
Page 80
Sort/Stack/Staple
67
2
C
Set your originals, then press the {
Start
} key.
When setting a stack of originals in the document feeder
A Set a stack of originals in the document feeder, then press the {
Start
} key.
After all the originals are scanned, the copies are delivered to the tray.
Note
❒ The last page should be on the bottom.
When setting an original on the exposure glass or in the document feeder
using Batch (SADF) mode
Reference
⇒
P.36 “Batch (SADF) mode”.
A Set the original, then press the {
Start
} key.
Note
❒ Start with the first page to be copied.
B Set the next original. When it is placed on the exposure glass, press the
{
Start
} key.
Note
❒ Set the original in the same direction as the first one.
C After all originals are scanned, press the {
#
} key.
To Stop Scanning Temporarily
When you are using the Sort, Stack, or Staple function, the originals are scanned
into memory.
A
Press the {
Clear/Stop
} key to stop originals from being scanned into memo-
ry.
To resume scanning
A Press the
[Resume]
key to resume scanning.
Note
❒ Scanned images in memory are not cleared.
To clear scanned images of the originals
A Press the
[Cancel]
key.
Scanning is stopped with the images cleared.