Savin 3370 - Manual (Page 55)

Copying
42
2
Combined Auto and Manual Image Density
A Make sure that the
[Auto Image Density] key is selected.
B Press the
[Lighter] or [Darker] key to adjust the density.
Note
❒ If you do not wish to set any other functions, press the { Start } key to
start copying.
Selecting Original Type Setting
Select one of the following types to match your originals:
❖ Text
Select this mode when your originals contain only letters (no pictures).
❖ Text·Photo
Select Text·Photo when your originals contain photographs or pictures with
letters.
❖ Photo
Delicate tones of photographs and pictures can be reproduced with this
mode.
❖ Pale
Select this mode for originals that have lighter lines written in pencil, or for
faint copied slips. The faint lines will be clearly copied.
❖ Generation Copy
If your originals are copies (generation copies), the copy image can be repro-
duced sharply and clearly.
Note
❒ You can directly display the [Original Mode] key on the copy original display.
See “Original Mode Display” in
⇒
P.310 “General Features 1 /
3
” .
❒ You can adjust the quality level for each original type. See “Original Mode
Quality Level” in
⇒
P.310 “General Features 1 /
3
” .
❒ In Connect Copy mode, make adjustments to the original type on the master
unit.