Savin 3370 - Manual (Page 44)

Setting Originals
31
2
Setting Originals
Limitation
❒ Set originals after correction fluid and ink has completely dried. Not taking
this precaution could mark the exposure glass and cause marks to be copied.
Note
❒ Basically originals should be aligned to the rear left corner. However, some
copy functions may produce different results depending on the direction of
the originals. For details, see the explanations of each function.
Reference
⇒
P.19 “Originals”.
Setting Originals on the Exposure Glass
A
Lift the document feeder.
Important
❒ Do not open the document feeder with a force. Otherwise, the cover of the
document feeder might open or be damaged.
Note
❒ Be sure to open the document feeder by more than 30 °
. Otherwise the orig-
inal size might not be detected correctly.