Savin 4502/4502p - Manual (Page 75)

Copying
62
2
B Press the [Custom Size] key.
C Press the [Vertical mm] key and
enter the vertical size of the pa-
per with the number keys, then
press the [#] key.
Note
❒ To change the number en-
tered, press the [Clear] or
{Clear/Stop} key and enter the
new number.
D Enter the horizontal size of the
paper with the number keys,
then press the [#] key.
Note
❒ If the [Horiz mm] key is not
highlighted, press the [Horiz
mm]
key.
❒ To change the number en-
tered, press the [Clear] or
{Clear/Stop} key and enter the
new number.
E To register the custom size en-
tered, press the [Store] key and
then press the [Cancel] key.
Note
❒ If you do not register the cus-
tom size, go to step F.
❒ Only one custom size can be
stored.
❒ To recall the custom size
stored, press the [Recall] key.
❒ If you do not register the cus-
tom size, the size you set is
deleted when modes are
cleared.
F Press the [OK] key.
D
Set your originals, then press the
{{{{Start}}}} key.
E
When your copy job is finished,
press the
{{{{Clear Modes}}}} key to
clear the settings.
AdonisC2_ENcopy122F_FM.book Page 62 Thursday, February 15, 2001 3:23 PM