Siemens 3000 V3.0 - Manual (Page 53)

Conducting calls – enhanced functions
45
Step-by-Step
c
Press the Talk key.
Call the system menu.
> < [
Select and confirm the menu item.
> < [
Select and confirm the menu item.
#o
Press the "#" key and enter the required code (0... 9).
The connected computer responds. The computer will
guide you through the data entry process. It will proc-
ess your entries directly.
a
Press the On-hook key to end the process.
Activating control relays
The service engineer can set up a maximum of 4 control
relays that enable various equipment (e.g. door opener)
to be activated and deactivated.
It is possible to access a specific control relay. Depend-
ing on the configuration, the control relays can be
•
activated and deactivated automatically, or
• activated and deactivated automatically on the basis
of a timer.
Prerequisite: The service engineer has set up at least
one switch.
This function can also be called by entering the code
(
Æ page 88).
Activating a control relay
c
Press the Talk key.
Call the system menu.
> < [
Select and confirm the menu item.
> < [
Select and confirm the menu item.
o
Follow the user guidance system from this point on-
wards. Enter the required switch code (1... 4).
a
Press the On-hook key to end the process.
Menu
Service?
*42=Tel. data
service?
TDS code:
Menu
Service?
*90=Control Relay
On?