Siemens 3000 V3.0 - Manual (Page 49)

Conducting calls – enhanced functions
41
Step-by-Step
Activating/deactivating do not disturb
You can block calls to your handset on a temporary ba-
sis, while still being able to make calls yourself. Internal
callers hear the busy tone, while external callers reach
another telephone defined by the service engineer (in-
tercept position). Authorised internal callers automati-
cally override the do not disturb after five seconds.
Activating do not disturb
c
Press the Talk key.
Call the system menu.
> < [
Select and confirm the menu item.
a
Press the On-hook key to end the process.
Deactivating do not disturb
c
Press the Talk key.
Call the system menu.
> < [
Select and confirm the menu item.
a
Press the On-hook key to end the process.
Call charge display
After a call has ended, the display shows the connec-
tion charges for the current call as standard. If the costs
are to be displayed continuously during an outgoing call,
this function must be requested from the carrier.
You can check and display the call charges for your
phone number as a total for a period that can be set by
the service engineer.
First the call charges for the last charged call are dis-
played. The total call charges are displayed after five
seconds.
Menu
Do Not Disturb ON?
Menu
Do Not Disturb OFF?
Note:
If a call is transferred, the costs are assigned to
the telephone to which the call was transferred
from this point onwards.