SMC Networks SMC9462TX - Manual (Page 47)

C
ABLES
B-3
10BASE-T/100BASE-TX Pin Assignments
With 10BASE-T/100BASE-TX cable, pins 1 and 2 are used for
transmitting data, and pins 3 and 6 for receiving data. The “+” and
“-” signs in the tables below are used to represent the polarity of
the wires that make up each wire pair.
1000BASE-T Pin Assignments
The table below shows the 1000Base-T pinouts for a
straight-through cable connection. These ports require that all four
pairs of wires be connected. Note that for 1000Base-T operation, all
four pairs of wires are used for both transmit and receive.
RJ-45 Pin Assignments
Pin Assignment*
1 Tx+
2 Tx-
3 Rx+
6 Rx-
Connector A
Connector B
1 <- - - - - - - - - - - - - - - - - -> 1
2 <- - - - - - - - - - - - - - - - - -> 2
3 <------------------------------> 3
6 <------------------------------> 6
4 <- - - - - - - - - - - - - - - - - -> 4
5 <- - - - - - - - - - - - - - - - - -> 5
7 <------------------------------> 7
8 <------------------------------> 8