Sony SRX-S105 - Manual (Page 62)

62
Connecting the Projector
Chap
te
r 2
Pr
epa
ra
tio
n
s
Connecting with a Computer
Equipped With an Analog RGB
Output
Attach the optional LKRI-001 analog input board to the
input board attachment part on the projector, and connect
with a computer.
Select “RGB” in “Signal Mode” of “Input Source” in the
PICTURE CONTROL window.
For details, see page 69.
Connecting with HD-SDI Equipment
Attach the optional LKRI-002 HD-SDI (4:2:2) or LKRI-
003 HD-SDI (4:4:4) input board to the input board
attachment part, and connect the HDCAM recorder/player.
The illustration below shows an example with the LKRI-
002 attached on INPUT B.
When the LKRI-003 is attached to the projector, select the
type of signal with “Signal Mode” of “Input Source” in the
PICTURE CONTROL window. For Single-link input,
select “YPbPr” or “YPbPr FULL.” For Dual-link input,
select “RGB” or “RGB FULL.”
For details, see page 69.
Connecting with Component/Video
GBR Equipment
Attach the optional LKRI-001 analog input board to the
input board attachment part on the projector, and connect
with a DVD recorder/player or analog video equipment
equipped with the component output, or an high-definition
equipment equipped with a video GBR connector.
Note
R(P r /C r ) B(P b /C b ) HD VD G(Y/Y)
IN
INTER LOCK ETHERNET RS232C
OUT
IN OUT
AUX DVI-D
R/G/B/HD/VD
connectors
Monitor cable (not supplied)
Computer
to monitor output
Left side
Note
SRW-5000 HD DIGITAL VIDEO CASSETTE RECORDER
INTER LOCK ETHERNET RS232C
IN OUT
AUX DVI-D
IN connector
HD-SDI connecting cable
(not supplyed)
HDCAM recorder/player, etc.
Left side
to HD-SDI output