Star Micronics PUNKT-MATRIX-DRUCKER LC-7211 - Manual (Page 124)

113
Adjusting for paper thickness
Paper comes in different weights, normally expressed
as gsm (grams per square meter) or lbs (pounds).
Some types of forms have multiple pages that make
them quite thick. Use the following procedure to
change the gap between the print head and the platen
and adjust for paper thickness.
❏ Move the adjustment lever according to the table
on page 115. Position 1 is most suitable for
single-sheet paper.
7
5
3
1
Adjustment lever
Levier de réglage
Einstellhebel
Leva di regolazione