Samsung CLP-300 Series - Manual (Page 48)

Specifications
8.2
Supported Sizes of Paper
N OTE : You may experience jams when using print materials
with a length of less than 140 mm (5.5 in). For optimum
performance, ensure that you are storing and handling the
paper correctly. Please refer to “Printer and Paper Storage
Environment” on page 8.3.
Tray * (mm/in) Paper tray Weight Capacity **
Plain paper
Letter (216 x 279/8.5 x 11)
A4 (210 x 297/8.27 x 11.69)
A5 (148 x 210/5.83 x 8.27)
Executive (184 x 267/7.25 x 10.5)
Legal (216 x 356/8.5 x 14)
JIS B5 (182 x 257/7.17 x 10.12)
A6 (105 x 148/4.13 x 5.83)
Oficio (216 x 343/8.5 x 13.5)
Folio (216 x 330/8.5 x 13)
Tray 60 to 90 g/
m
2 (16 to 24
lb bond)
150 sheets
of 75 g/m
2
(20 lb
bond) paper
Manual feed 60 to 105 g/
m 2 (16 to 23
lb bond)
1 sheet of
paper
Envelopes
No.10 (105 x 241/4.13 x 9.49)
DL (110 x 220/4.33 x 8.66)
C5 (162 x 229/6.38 x 9.02)
C6 (114 x 162/4.49 x 6.38)
Monarch (98 x 191/3.87 x 7.50)
No.9 (98 x 225/3.87 x 8.87)
6 3/4 Envelop(92 x 165/3.62 x 6.5)
Manual feed 75 to 90 g/
m 2 (20 to 24
lb bond)
1 sheet of
paper
Labels ***
Letter (216 x 279/8.5 x 11)
A4 (210 x 297/8.3 x 11.7)
Manual feed 120 to 150 g/
m 2 (32 to 40
lb bond)
1 sheet of
paper
Transparency films
Letter (216 x 279/8.5 x 11)
A4 (210 x 297/8.3 x 11.7)
Manual feed 138 to 146
g/m 2 (37 to
39 lb bond)
1 sheet of
paper
Card stocks
Post Card (101.6 x 152.4/4 x 6)
Manual feed 105 to 163
g/m 2 (23 to
44 lb bond)
1 sheet of
paper
Minimum size
(custom, 76 x 127/3 x 5) Manual feed 60 to 120 g/
m 2 (16 to 32
lb bond)
1 sheet of
paper
Maximum size (Legal) Manual feed 1 sheet of
paper
* The printer supports a wide range of media sizes.
** Capacity may vary depending on print material’s weight and thickness, and environmental con-
ditions.
*** Smoothness: 100 to 250 (Sheffield)
Guidelines for Using Paper
For the best result, use conventional 75 g/m 2 (20 lb) paper.
Ensure that the paper is of good quality, and free of cuts, nicks,
tears, spots, loose particles, dust, wrinkles, voids, and curled
or bent edges.
If you are unsure of what type of paper you are loading, such
as bond or recycled paper, check the label on the package.
The following problems may cause print quality deviations,
jamming or even damage to the printer.
N OTES :
• Do not use letterhead paper printed with low-temperature
inks, such as those used in some types of thermography.
• Do not use raised or embossed letterhead.
• The printer uses heat and pressure to fuse toner to the
paper. Ensure that any colored paper or preprinted forms
use inks that are compatible with this fusing temperature
(180 °C or 356 °F for 0.1 second).
Symptom
Problem with
Paper
Solution
Poor print quality
or toner
adhesion,
problems with
feeding
Too moist, too
rough, too
smooth, or
embossed; faulty
paper lot
Try another kind of
paper, between 100 ~
250 Sheffield, 4 ~ 5 %
moisture content.
Dropout,
jamming, curl Stored improperly Store paper flat in its
moisture-proof
wrapping.
Increased gray
background
shading/printer
wear
Too heavy Use lighter paper.
Excessive curl
problems with
feeding Too moist, wrong
grain direction, or
short-grain
construction
Use long-grain paper.
Jamming,
damage to
printer
Cutouts or
perforations
Do not use paper with
cutouts or
perforations.
Problems with
feeding Ragged edges Use good quality
paper.