Samsung SCC-C4353 - Manual (Page 22)

_ setup
setup
DAy/NIGHT
You can specify a recording mode according
to the scene.
Select - .
Select a screen transition mode according
to the illumination, and set options as
appropriate.
DAY : Fixed to DAY mode, regardless of
the scene.
NIGHT : Fixed to NIGHT mode,
regardless of the scene.
If BURST is set to , the burst signal will be output along with the black-
and-white composite video signal.
AUTO : According to the luminance, this
will switch DAY to NIGHT mode, or vice
versa.
BURST : If set to , the burst
signal will not be output in NIGHT mode.
DAYNIGHT BRIGHTNESS : Specify
the brightness level switching from
COLOR to BW filter.
Adjusting from HIGH to LOW will cause
to switch the filter in a darker screen.
DAYNIGHT DWELL TIME : Time
required to determine the filter switch.
NIGHTDAY BRIGHTNESS : Specify the brightness level switching from
BW to COLOR filter. Adjusting from HIGH to LOW will cause to switch the
filter in a darker screen.
NIGHTDAY DWELL TIME : Time required to determine the filter switch.
MASK AREA : If there exists a bright
spot light source in a night scene, you
can specify the size and position as
needed.
This will prevent an error in switching
filter, or failure to determine the filter
switch in a night scene where a bright
spot light source exists.
Any excessively bright area in a night
scene will be MASKed.
You can specify MASK 1 and 2 simultaneously.
1.
2.



-
-
-
-
-
-

AUTO
BURST OFF
DAY  NIGHT
BRIGHTNESS MID
DWELL TIME 2SEC
NIGHT  DAY
BRIGHTNESS MID
DWELL TIME 5SEC
MASK AREA 1 2
MASK AREA
DAY/NIGHT AUTO
WHITE BAL
FOCUS MODE ONEAF
ZOOM SPEED [2]
DISPLAY ZOOM OFF
DIGITAL ZOOM OFF
DETAIL [2]
V-SYNC (INT)---
AGC COLOR SUP MID
NTSC ENGLISH.indd 22 2009-9-22 15:48:33