Samsung SCC-C4353 - Manual (Page 18)

1_ setup
setup
CAmERA SET
You can configure the general settings of the camera module.
Select
The Camera Setup menu appears.
Change the settings as necessary, or select
an item to check.
CAmERA ID
Provide the ID and location for a camera that displays on the screen.
Select - .
Use
▲▼ _+ to select a desired character,
then press [ENTER].
In the lower input box of the screen, the
selected character will be entered.
You can enter up to 54 characters including
alphabets, numbers and special characters.
LOCATION : Specify the display position
of the camera ID.
When done, press [ENTER].
The camera ID will be displayed in the specified position.
vPS
If you set it to , the camera images will be displayed in progressive mode.
VPS is only available for SCC-C4255 and SCC-C4355.
1.
2.
1.
2.


3.
M 
 CAMERA SET 
CAMERA ID OFF
VPS OFF
IRIS ALC
MOTION (F.FAST) ---
DNR MID
SHUTTER (OFF) ---
SENS-UP AUTO X4
FLICKERLESS OFF
XDR MID
A BCDEFGHIJKLMNOPQRSTUVWXYZO
123456789 : ?_+
 ()/
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
NTSC ENGLISH.indd 18 2009-9-22 15:48:32