Minute-minder, 3 programming, Instructions for the user – Smeg A2-6 User Manual

Page 14

Instructions for the user

5.2.2

Minute-minder

This function does not stop cooking but just triggers the beeps.

When the

key is pressed the display

illuminates, appearing as shown in figure 1;

Press the

keys within 6/7 seconds to set

the minute-minder. Whenever a key is pressed, 1
outside segment, representing 1 cooking minute
will light up (figure 2 shows 10 cooking minutes).

The countdown will start 6/7 seconds after the last
key is pressed; at the end of it, you will hear the
beeps.

During cooking with countdown, the current time

can be displayed by pressing the

key once;

press again to return to the minute-minder display.

At the end of the countdown, the oven has to be
switched off by hand, by turning the thermostat
and the function selector to 0.

5.2.3

Programming

Cooking duration time: the 2

button

can be used to set the cooking

time. Before setting it, turn the thermostat to the cooking temperature of
choice and the function selector knob to any setting. To set the cooking time,
proceed as follows:
-

Press the

key for 1/2 seconds; the pointer will

move to position 12 (Fig. 1).

Use the

and

keys to set the cooking time;

whenever the

key is pressed, 1 minute will be

added to the cooking time, and every 12 minutes a
new inside segment will light up (figure 2 shows a
cooking time of 1 hour).

Once the required time has been set, cooking will
start about 6 seconds after the last time the

. key is pressed.

Once cooking has started, the display will show the
current time, represented by the constantly on
segments, and the minutes left until cooking
finishes, represented by the flashing segments
(every flashing segments indicates 12 minutes of
cooking time left).