Error messages, References – Sharp MD-MT877H User Manual
Page 54
54
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
References
– Error Messages –
Error Messages
ERROR MESSAGES
BATT EMPTY
(LoBATT)
BLANK MD
(BLANK)
Can’t COPY
(Can’tC)
Can’t EDIT
(Can’tE)
Can’t READ *
(Can’tS)
(Can’tT)
(Can’tU)
Can’t REC
(Can’tR)
Can’t STAMP
Can’t WRITE
(Can’tW)
CHARGEmode
DEFECT
(DEFECT)
DISC FULL
Er-MD **
(ErMD*)
HOLD
(HOLD)
LOCKED
(Can’tLOCK)
MEANING
●
The battery is run down.
●
Nothing is recorded.
●
You tried to record from a copy prohib-
ited MiniDisc.
●
A track cannot be edited.
●
The disc data cannot be read because the
disc is damaged.
●
Recording cannot be performed correctly
due to vibration or shock.
●
Stamp function does not work.
●
Cannot save the TOC information correctly
to a MiniDisc. (A large portion of the disc
has been damaged.)
●
The Charge/Operation switch is not set to
the operation mode when using this unit
with the AC adaptor.
●
The disc is scratched.
●
The disc is out of recording space.
●
The microprocessor has reported a sys-
tem fault and the unit is out of order.
●
The unit is in the hold mode.
●
You removed a MiniDisc whilst recording
or editing.
REMEDY
●
Charge the rechargeable battery or replace the alkaline bat-
tery (or use the AC adaptor for power).
●
Replace the disc with a recorded disc.
●
Record using the analogue cable.
●
Change the stop position of the track and then edit it.
●
Reload the disc.
●
Replace it with another recorded disc.
●
Re-record or replace it with another recordable disc.
●
Check the number of tracks.
●
Replace the disc with another recordable disc.
●
Set the Charge/Operation switch to the operation mode.
●
If the sound you hear is not right, record again.
●
Replace the disc with another recordable disc.
●
Replace it with another recordable disc.
●
To have it repaired, go to the distributor where you purchased
the unit.
●
Return the HOLD switch to its original position.
●
Turn off the power and remove the MiniDisc.