Sharp MD-MT877H - Manual (Page 39)

39
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Useful Features – Checking Displays –
Checking Displays
To check the remaining recording time
and the total playing time
Whilst in the stop mode, press the DISP button.
Each time the button is pressed, the display will change as
follows:
Disc name
Total playing
time
Remaining
recording time
Total playing
time
Notes:
● If the disc name or the track name was not originally
recorded on the MiniDisc, “NO NAME” will be displayed.
● Remaining recording time will not be displayed with a
playback only MiniDisc.
● Elapsed playback time and remaining playback time may
be different from the actual time.
To check the elapsed time and remaining
time of the track
During playback, press the DISP button.
Each time the button is pressed, the display will change as
follows:
Elapsed playback
time
Remaining
playback time
Track name
● Remaining time of recording varies depending on the
set recording mode.
● If the remaining time of recording is over 100 minutes,
the first digit of the seconds is not displayed on the re-
mote control.