Sharp MD-MT877H - Manual (Page 22)

22
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Basic Operation
– Recording –
Recording (continued)
TOC display
About the TOC
After any recording or editing function “TOC” (Table Of
Contents) is displayed. To finalise the recording or editing
function, press the •
■ / :OFF button. During this process
“TOC” will flash and “TOC EDIT!” will be displayed.
During any recording or editing function the MiniDisc unit
Lid is locked, the MiniDisc can not be removed until the
process is finalised.
Warning
● If the power is removed (Battery/AC adapter) whilst
“TOC” is displayed the MiniDisc unit lid will remain locked
until the battery/main power is restored and the unit is
turned on. Your new recordings or edited changes will
be lost and your MiniDisc may become unusable.
Caution:
● Whilst “TOC” or “TOC EDIT!” is displayed, follow the
instructions below.
– Do not jerk or bump the unit.
– Do not unplug the AC adaptor.
– Do not remove the rechargeable battery or an alka-
line battery.
– Do not subject the unit to shock.
Otherwise, tracks may not be recorded properly.
To interrupt recording
Press the
06
button.
● The track number will be increased by one each time
the recording is interrupted.
To stop recording
Press the •
■ / :OFF button.
● When recording stops, “TOC” appears (Table Of Con-
tents). Whilst “TOC” appears the MiniDisc recorded
contents have not yet been updated.
● To prevent the new recording from being lost it is not
possible to remove the MiniDisc whilst “TOC” is dis-
played.
To update the recorded contents of the MiniDisc
Press the •
■ / :OFF button whilst in the stop mode.
● The power turns off after recorded contents have been
updated on the MiniDisc.