Sharp MD-MT877H - Manual (Page 40)

40
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Useful Features – Checking Displays –
To display the playing time of an indi-
vidual track
1
Whilst in the stop mode, press the
5 5 5 5 5
or
4 4 4 4 4
button to display the track number and
track name.
2
Press the DISP button to display the play-
ing time for that track.
● Each time the
5
or
4
button is pressed, the
playing time of the previous or next track will be
displayed.
Checking the remaining amount of
battery level
The remaining amount of battery level is shown
by the battery indicator (
) during operation.
● When the battery is completely discharged, the battery
indicator will flash. Recharge the battery or replace the
alkaline battery with a new one.
● When the battery has run completely out, “BATT EMPTY
(LoBATT)” will appear. Then, the power will be discon-
nected automatically.
Notes:
● If you use the battery which you stopped charging half-
way, “
” may appear. It does not mean that the bat-
tery is completely charged.
● The battery indicator will not correctly display the remain-
ing capacity for approximately 20 seconds after the power
has been turned on.
● When the AC adaptor or a separately available car adap-
tor is used, the battery indicator will not be shown.
● The number of bars shown in the battery indicator may
increase or decrease, depending on the operation be-
ing performed. This is normal.
Track name
Track number
Playing time
Checking Displays : continued
When the battery
level is high When the battery
level is very low
How to read the battery indicator