Spectra Logic RXT150 - Manual (Page 9)

Chapter 2. Troubleshooting the RXT150
9
Using the Force Eject Utility
1. Log in to the RLC as a user with Administrative privileges.
2. Select Maintenance > Tools. The RXT Utilities screen appears (Figure 2-1).
3. Select Load/Unload Media Pack. The screen refreshes to show the details of the
utility (Figure 2-1).
4. Select Unload RXT Media pack, then select force.
5. Select Run.
• If this operation is successful, the RXT media pack ejects from the RXT150,
and the Load/Unload RXT Media Pack screen appears, confirming that the
pack is not longer loaded.
• If this operation is not successful, the RLC presents an error. Proceed to
Holding the Load/Unload Button on page 10.
6. Select Finish to complete the operation.
Figure 2-1 The RXT Utilities screen, showing the Load/Unload RXT Media Pack utility.