Spectra Logic RXT150 - Manual (Page 28)

Chapter 3. Troubleshooting RXT Media
28
4. Use a #2 Phillips screwdriver to loosen the ESD resistor screw on the side of the
disk drive (Figure 3-8).
On Green RXT media, you may get to skip this step. See Figure 3-9.
Figure 3-8 The ESD screw (Silver media shown).
Figure 3-9 Green RXT media.
If you are replacing a
disk drive on this end,
you need to remove the
ESD screw.
If you are replacing a
disk drive on this end,
you do not need to
remove an ESD
screw; it is only
present on the other
drive.
Pogo Pad
Display