Sharp FO-DC550 - Manual (Page 33)

3 SCAN
33 C O N T E N T S I N D E X
Button Manager Settings
(part 2)
4 Set up the "Color Mode", "Edge" and other scan
settings in the "Scan Setup" area.
The tab names are initially "SC1:" to "SC6:". To assign a name to
a tab, click the "Menu Name" button and enter the desired name.
After entering the name, click the "Apply" button or the
"OK" button in the setting screen. The assigned names will
appear in the machine display when you select a scan
menu at the machine. (Example: SC1:xxxxx)
5
Click the "OK" button.
This completes the settings.
If a character that the machine cannot display is entered
in the "Menu Name", "?" is displayed on the machine.
Note