Sharp FO-DC550 - Manual (Page 27)

3 SCAN
27 C O N T E N T S I N D E X
Scanning from a WIA-Compliant Application (Windows XP)
(part 2)
3 Select the paper source and picture type, and
click the "Preview" button.
The preview image will appear.
If you placed the original on the document glass, select
"Flatbed" for the "Paper source".
If you placed the original in the RSPF, select "Document
Feeder" for the "Paper source" and specify the original
size in "Page size".
4 Click the "Scan" button.
Scanning begins and the image is acquired into Paint.
Use "Save" in your application to specify a file name
and folder for the scanned image, and save the image.
To cancel a scanning job after clicking the "Scan"
button, click the "Cancel" button.
● If you select "Document Feeder" for the "Paper source"
and click the "Preview" button, the top original in the
RSPF is previewed. The previewed original is sent to
the original exit area, so you will need to return it to the
RSPF before starting the scanning job.
● To view Help for a setting, click the button in the
upper right-hand corner of the window and then click
the setting.
Note