Timer-recording radio programmes – Sony ZS-M50 User Manual
Page 57
The Timer
57
GB
The Timer
Timer-recording
radio programmes
You can set timer to record the radio at a
certain time. You can also record from the
component connected to the LINE IN jack
of the player.
Make sure you have set the clock (see
“Setting the clock” on page 53).
Before you begin, make sure “TIMER PLAY” or
“TIMER REC” is not displayed. If either one is
displayed, press STANDBY.
1
Tune in the radio station and insert an MD.
2
Press TIMER.
“TIMER PLAY” or
“TIMER REC” flashes in
the display.
Make the following settings by checking the
indications in the display.
3
Turn the jog dial until “TIMER REC” flashes in the
display, and press YES•ENTER.
4
Turn the jog dial until “RADIO” flashes in the
display, and press YES•ENTER.
When recording from the component connected to
the LINE IN jack of the player, turn the jog dial
until “LINE” flashes in the display, and press
YES•ENTER.
5
Set the timer to the hour and the minutes you want
to start recording.
1 Turn the jog dial to
set the hour and
press YES•ENTER.
2 Turn the jog dial to
set the minutes,
and press
YES•ENTER.
Notes
• You cannot preset
recording timer and
waking up timer (page
55) at the same time.
• When recording from
the component
connected to the LINE
IN jack of the player,
refer to the operating
instructions of the
component.
Tip
If you made a mistake,
press NO•CANCEL.
The setting entered last
will be cleared. Re-
enter it.
STANDBY
YES
ENTER
Jog dial
TIMER
continued