Sony ZS-M50 - Manual (Page 37)

Recording
37 GB
Recording
To pause recording
Press MD
^ (MD P on the remote). Press the button
again to resume recording.
Recording from a CD
Track marks on the source CD are recorded on the
same positions on the MD. Track marks are also added
automatically on the MD when you pause recording.
If unnecessary track marks are added, erase them after
recording (see ”Combining recorded tracks” on page
46).
1
Insert a CD.
2
Press CD p to activate the CD player.
3
Insert a recordable MD.
4
Press REC ( r on the remote).
The player stands by for recording.
5
Press MD ^ (MD ( or MD P on the remote).
Recording will be made from the last recorded
position.
6
Press CD ^.
To stop recording
Press MD
p.
To pause recording
Press MD
^ (MD P on the remote). Press the button
again to resume recording.
Tip
When you record a
programme of a station
whose name is labeled
on this player, the
station name is
recorded automatically
as the track name (up
to 50 names) (page 24).
Notes
•
After you
stop
recording,
do not disconnect the
mains lead or move
the player while “TOC
EDIT” is flashing in
the display. If you do
so, recording may not
be done properly.
• If you turn up the
volume too high,
sound skipping may
occur.
Tips
• To record over the
previous recording, see
page 38.
• To add track marks
during recording, press
REC where you want
to add track marks.
• To add track marks
after recording, see
“Dividing recorded
tracks” on page 44.