Sony ZS-M50 - Manual (Page 39)

Editing recorded tracks on the MD 39 GB
Editing recorded tracks on the MD
Before editing
On the MD, track marks are inserted
between the tracks. You can find the
beginning of the tracks quickly using the
track marks. You can change the
positions of the track marks. For
instance, you can divide a certain track
into several tracks by adding track
marks. You can also combine some
tracks into a new longer track by erasing
some track marks.
The position of the track marks to be
added are different depending on the
type of recording or recording
conditions
The type of The position of the
recording track marks to be
added
Recording The same positions on
a whole CD the source CD
(page 6)
Recording • The same positions on
from a CD the source CD
using REC • The position where
button you pause recording
(page 37) • The position where
you press REC
Recording • When there is no
from the radio sound input or a soft
or other sound continues
equipment during recording for
connected to more than 2 seconds
the player • The positions where
(pages 36 and you pause recording
63) • The positions where
you press REC
Editing recorded tracks on the MD
You can add or erase track marks after
recording. When you record, for
instance, from a radio or other
equipment connected to the player, track
marks may be added to the positions
you do not want. If that happens,
change the positions of the track marks
to those you want.
Change the track marks correctly
• To erase a track mark n “Combining
recorded tracks (Combine Function)”
(page 46): You can combine two tracks
into a single one by erasing the track
mark between the two tracks.
• To add a track mark n “Dividing
recorded tracks (Divide Function)”
(page 44): You can divide one track
into two tracks by adding a track
mark.
continued