Instructions for the user – Smeg A11A-5 User Manual

Page 16

Instructions for the user

5.2.3 Programming

Cooking duration time: the 2

button

can be used to set the cooking

time. Before setting it, turn the thermostat to the cooking temperature of
choice and the function selector knob to any setting. To set the cooking
time, proceed as follows:

Press the

key for 1/2 seconds; the pointer

will move to position 12 (Fig. 1).

Use the

and

keys to set the cooking time;

whenever the

key is pressed, 1 minute will

be added to the cooking time, and every 12
minutes a new inside segment will light up
(figure 2 shows a cooking time of 1 hour).

Once the required time has been set, cooking
will start about 6 seconds after the last time the

. key is pressed.

Once cooking has started, the display will show
the current time, represented by the constantly
on segments, and the minutes left until cooking
finishes, represented by the flashing segments
(every flashing segments indicates 12 minutes of
cooking time left).

When the end of the cooking time is reached, the timer will switch
off the oven heating elements, the beeps will start and the numbers
on the dial will flash.

The cooking time can also be reset by deleting the program set;

pressing the central key

for 1 or 2 seconds will delete the time

set and the oven will have to be switched off by hand.

Caution: cooking times of more than 6 hours cannot be set.