Symbol Technologies DS6708 - Manual (Page 67)

Chapter 6 USB Interface
Chapter 6
USB Interface
Introduction
This chapter describes how to set up the digital scanner with a USB host. The digital scanner connects directly
to a USB host, or a powered USB hub, and is powered by it. No additional power supply is required.
Throughout the programming bar code menus, default values are indicated with asterisks (
*
).
*
North American Standard USB Keyboard Feature/Option
*
Indicates Default
NOTE
Most computer monitors allow scanning the bar codes directly on the screen. When
scanning from the screen, be sure to set the document magnification to a level where the bar code
can be seen clearly, and bars and/or spaces are not merging.