Symbol Technologies DS6708 - Manual (Page 337)

Appendix B: Programming Reference B - 5
D 2 of 5
0 No options specified at this time. Always transmit 0.
Example: A D 2 of 5 bar code 4123, is transmitted as ]S04123
UPC/EAN
0 Standard packet in full EAN country code format, which is 13 digits for
UPC-A and UPC-E (not including supplemental data).
1 Two-digit supplement data only.
2 Five-digit supplement data only.
4 EAN-8 data packet.
Example: A UPC-A bar code 012345678905 is transmitted as ]E00012345678905
Bookland EAN
0 No options specified at this time. Always transmit 0.
Example: A Bookland EAN bar code 123456789X is transmitted as ]X0123456789X
Code 11
0 Single check digit
1 Two check digits
3 Check characters validated but not transmitted.
RSS Family
No option specified at this time. Always transmit 0. RSS-14 and
RSS-Limited transmit with an Application Identifier “01”.
Note: In UCC/EAN-128 emulation mode, RSS is transmitted using Code
128 rules (i.e., ]C1).
Example: An RSS-14 bar code 100123456788902 is transmitted as ]e001100123456788902.
EAN.UCC
Composites
(RSS,
UCC/EAN-128,
2D portion of
UPC composite)
Native mode transmission.
Note: UPC portion of composite is transmitted using UPC rules.
0 Standard data packet.
1 Data packet containing the data following an encoded symbol separator
character.
2 Data packet containing the data following an escape mechanism character.
The data packet does not support the ECI protocol.
3 Data packet containing the data following an escape mechanism character.
The data packet supports the ECI protocol.
UCC/EAN-128 emulation
Note: UPC portion of composite is transmitted using UPC rules.
1 Data packet is a UCC/EAN-128 symbol (i.e., data is preceded with ]JC1).
Table B-4 Modifier Characters (Continued)
Code Type Option Value Option