Symbol Technologies DS6708 - Manual (Page 32)

2 - 4 DS6708 Digital Scanner Product Reference Guide
LED Definitions
In addition to beep sequences, the digital scanner uses a two-color LED to indicate status. Table 2-2 defines
LED colors that display during scanning.
Scanning in Hand-Held Mode
Install and program the digital scanner (see Setting Up the Digital Scanner on page 1-3 ). For assistance,
contact the local supplier or the local Symbol Global Interaction Center .
Scanning with the Digital Scanner
1. Ensure all connections are secure (see the appropriate host chapter.)
2. Aim the digital scanner at the bar code.
Figure 2-9 Scanning in Hand-Held Mode
3. When the digital scanner senses movement, in its default Auto Aim trigger mode, it projects a red laser
aiming pattern (shown in
Figure 2-10 ) which allows positioning the bar code or object within the field of
view. (To turn off the default Auto Aim trigger mode, see Trigger Mode on page 4-8 .)
Figure 2-10 Laser Aiming Pattern
If necessary, the digital scanner turns on its red LEDs to illuminate the target bar code.
Table 2-2 Standard LED Definitions
LED Indication
Off No power is applied to the digital scanner, or the digital scanner is on and ready to
scan.
Green A bar code was successfully decoded.
Red A data transmission error or digital scanner malfunction occurred.