Symbol Technologies DS6708 - Manual (Page 40)

3 - 4 DS6708 Digital Scanner Product Reference Guide
Technical Specifications
Digital scanner emits low/high/low
beeps. Clearing Code 39 buffer. Normal when scanning the Code 39
Buffering Clear Buffer bar code or
upon attempt to transmit an empty
Code 39 buffer.
Digital scanner emits a power-up
beep after changing USB host type. The USB bus re-established power to
the digital scanner. Normal when changing USB host
type.
Digital scanner emits one high beep
when not in use. In RS-232 mode, a character
was received and Beep on
option is enabled. Normal when Beep on is
enabled and the digital scanner is in
RS-232 mode.
NOTE
If after performing these checks the digital scanner still experiences problems, contact the
distributor or call the local Symbol Support Center. See page xiii for the telephone numbers.
Table 3-1 Troubleshooting (Continued)
Problem Possible Causes Possible Solutions
Table 3-2 Technical Specifications
Item Description
Physical Characteristics
Dimensions 6.55 in. x 4.72 in. x 2.82 in. (16.6 cm x 11.9 cm x 7.1 cm)
(H x L x W)
Weight: 6.4 oz. (182 gm)
Voltage & Current: 5 +/-10%VDC @ 350 mA
Color Cash Register White or Twilight Black
Performance Characteristics
Light Source Aiming: 650 nm laser diode
Illumination: 630 nm LED
Field of View
(Vertical x Horizontal) 34º (V) x 43º (H)
Roll
Pitch
Yaw 360º
+/- 65º
+/- 60º
Symbology Decode Capability
1-D UPC/EAN and with supplementals, Code 39, Code 39 Full ASCII, Tri-optic Code 39,
RSS Variants, UCC/EAN 128, Code 128, Code 128 Full ASCII, Code 93, Codabar
(NW1), Interleaved 2 of 5, Discrete 2 of 5, MSI, Codell, IATA, Bookland EAN, Code 32
PDF417 (& Variants) PDF417, microPDF417 and Composite Codes