Symbol Technologies DS 6608 - Manual (Page 34)

DS 6608 Product Reference Guide 2-8
Scanning in Hands-Free Mode
The optional Intellistand adds greater flexibility to scanning operation. When the digital scanner is seated in the stand’s “cup,” the
digital scanner’s built-in sensor places the digital scanner in hands-free mode. When the digital scanner is removed from the stand
it operates in its normal hand-held mode.
Figure 2-6. Inserting the Digital Scanner in the Intellistand
To operate the digital scanner in the IntelliStand:
1. Ensure the digital scanner is properly connected to the host (see the appropriate host chapter for information on host
connections).
2. Insert the digital scanner in the Intellistand by placing the front of the digital scanner into the stand’s “cup” (see Figure 2-6 ).
3. Use the Intellistand’s adjustment knobs to adjust the height and angle of the digital scanner.
4. Center the symbol in the aiming pattern. The entire symbol must be within the brackets.
5. Upon successful decode, the digital scanner beeps and the LED turns green. For more information on beeper and LED
definitions, see
Table 2-1 and Table 2-2 .
Scanner Holder
(Cup)
Angle Adjustment Knob
Height Adjustment Knob