Symbol Technologies DS 6608 - Manual (Page 177)

Symbologies 13-19
Convert UPC-E1 to UPC-A
Parameter # 26h
Enable this to convert UPC-E1 decoded data to UPC-A format before transmission. After conversion, the data follows UPC-A format
and is affected by UPC-A programming selections (e.g., Preamble, Check Digit).
When disabled, UPC-E1 decoded data is transmitted as UPC-E1 data, without conversion.
EAN-8/JAN-8 Extend
Parameter # 27h
When enabled, this parameter adds five leading zeros to decoded EAN-8 symbols to make them compatible in format to EAN-13
symbols.
When disabled, EAN-8 symbols are transmitted as is.
Convert UPC-E1 to UPC-A (Enable)
(01h)
*
Do Not Convert UPC-E1 to UPC-A (Disable)
(00h)
Enable EAN/JAN Zero Extend
(01h)
*
Disable EAN/JAN Zero Extend
(00h)