Symbol Technologies DS 6608 - Manual (Page 147)

Scanner Emulation Interface 11-5
Scanner Emulation Host
Scan the bar code below to enable the Scanner Emulation host.
Scanner Emulation Host Parameters
Beep Style
The Scanner Emulation host supports three beep styles.
• Beep On Successful Transmit: The digital scanner beeps when the attached decoder issues the decode signal to the
digital scanner, so the digital scanner and the attached decoder beep at the same time.
• Beep At Decode Time: The digital scanner beeps upon decode. This results in a double beep sequence from most
decoders, since the digital scanner beeps, and the decoder beeps (at a different frequency) when it successfully decodes the
output.
• Do Not Beep: Only the attached decoder issues the decode beep.
In all cases, if an error occurs, the digital scanner issues error beeps.
Scanner Emulation Host
*Beep On Successful Transmit
Beep At Decode Time
Do Not Beep