Symbol Technologies DS 6608 - Manual (Page 146)

DS 6608 Product Reference Guide 11-4
3. Scan the Scanner Emulation Host bar code from Scanner Emulation Host on page 11-5 to enable the Scanner Emulation host
interface.
4. To modify any other parameter options, scan the appropriate bar codes in this chapter.
Connect the digital scanner to 5 volt decoders only. Connecting the digital scanner to a 12 volt
decoder can damage the digital scanner and invalidate the warranty.
Scanner Emulation Parameter Defaults
Table 11-1 lists the defaults for the Scanner Emulation host. To change any option, scan the appropriate bar code(s) provided in the
Scanner Emulation Host Parameters section beginning on page 11-5 .
See Appendix A, Standard Default Parameters for all user preferences, hosts, symbologies, and
miscellaneous default parameters.
Table 11-1. Scanner Emulation Default Table
Parameter Default Page Number
Beep Style Beep on Successful Transmit 11-5
Parameter Pass-Through Parameter Process and Pass
Through 11-6
Convert Newer Code Types Convert Newer Code Types 11-7
Module Width 20 µs 11-8
Convert All Bar Codes to Code 39 Do Not Convert to Bar Codes
to Code 39 11-8
Code 39 Full ASCII Conversion Disable 11-9
Transmission Timeout 3 seconds 11-9
Ignore Unknown Characters Ignore Unknown Characters 11-10
Leading Margin 2 ms 11-11
Check for Decode LED Check for Decode LED 11-12
WARNING
Note