Sony HDW-F500 - Manual (Page 154)

Menu List
A-26
Appendix
Appendix
Specifies the type of editing for digital audio signals.
cut edit: Cut editing (discontinuity in audio signal may result
at the join, causing noise.)
cross fade: Cross-fade (see figure below.)
fade in/out: Fade-out and fade-in (see figure below.)
Note
The “t” in the figures above is the time set by item 811.
For details of item 811, see page A-34.
Function Item Settable range Item number
AUDIO EDIT
MODE 317 cut edit
[cross fade]
fade in/out
Set this item when the VTR is used as a recorder during
VTR-to-VTR editing. Specifies the action taken when the
recorder fails to synchronize with the player VTR.
off: Editing is not executed and the VTR enters STOP mode.
on: The VTR automatically repeats the editing again (not
more than twice).
318 EDIT RETRY off
[on]
CROSS FADE
320 PLAY COMMAND
DELAY START
TIME –30 frame
...
[0 frame]
...
+30 frame
This adjusts the time in frames required between the issue
of a playback command and this unit actually beginning the
execution of the command. This adjustment is useful for
synchronization between VTRs with widely differing start-up
timing.
321 VIDEO PREVIEW
MODE [VVV]
VBV
During a preview operation, this selects the video signals
that can be monitored on the monitor output and line output
connectors.
VVV: VIDEO-VIDEO-VIDEO: In the editing interval the
monitored signal is the player video signal or video input
(EE) signal.
VBV: VIDEO-BLACK-VIDEO: In the editing interval the
monitored signal is a black signal.
PB
INPUT
IN OUT
t t
FADE IN/OUT
PB
INPUT
IN OUT
t t
322 AUDIO PREVIEW
MODE [SSS]
SMS
During a preview operation, this selects the audio signals
that can be monitored on the monitor output and line output
connectors.
SSS: SOUND-SOUND-SOUND: In the editing interval the
monitored signal is the player audio signal or audio
input (EE) signal.
SMS: SOUND-MUTE-SOUND: In the editing interval the
audio signal is muted.