Sharp XG-PH70X - Manual (Page 91)

Useful Features
-89
DHCP Client Setting
Connect the LAN cable before turning the pro-
jector on. If not, the DHCP Client function does
not work.
Menu operation Page 58
Example: “Options (2)” screen menu
Description of DHCP Client
Note
• Select “ON” for “DHCP Client”. “Obtaining IP
Address...” appears, then the message “The
network settings have been changed.”, IP Address,
Subnet Mask and Gateway will be displayed.
• If the DHCP server is not available, “Could not
obtain IP Address.” appears.
In this case, set the TCP/IP manually. (See
“TCP/IP Setting” at right.)
Description
Obtains configuration parameters for
TCP/IP network automatically.
Sets the TCP/IP manually.
Selectable items
ON
OFF
TCP/IP Setting
Set the TCP/IP manually.
Menu operation Page 58
Example: “Options (2)” screen menu
1
Select “TCP/IP”, then press .
2
Enter “IP Address” using ' ' ' ' ', " " " " ", | | | | |
and \, then press .
3
Enter “Subnet Mask” using ' ' ' ' ', " " " " ",
| | | | | and \, then press
.