Sharp XG-PH70X - Manual (Page 26)

-24
INPUT/OUTPUT Terminals and Connectable Main Equipment
AUDIO input (2, 3) terminal
Connecting an audio cable. (Shared
audio input terminal for INPUT 2
and 3.) (See pages
28 and 29 .)
AUDIO input (1) terminal
Connecting an audio cable.
(Audio input terminal
dedicated to INPUT 1.) (See
page
27 .)
AUDIO input (4, 5) terminals
Connecting an audio cable.
(Shared audio input terminals for
INPUT 4 and 5.) (See page
34 .)
WIRED REMOTE terminal
For connecting the remote control when
the signals from the remote control cannot
reach the remote control sensor. (See
page
18 .)
AUDIO OUTPUT terminal
Connecting an audio cable.
(Shared audio output terminal for
INPUT 1 – 5.) (See page
36 .)
LAN terminal
(10 BASE-T/100 BASE-TX)
Connecting the computer or the
hub using a LAN cable. (See page
35 .)
INPUT 5 terminal
Connecting video equipment with S-video
output terminal (VCR, DVD player, etc.).
(See page
34 .)
RS-232C terminal
Connecting the computer to
control the projector.
(See page
35 .)
INPUT 4 terminal
Connecting video equipment without
S-video output terminal. (See page
34 .)
OUTPUT (FOR INPUT 1, 2)
terminal
Connecting the monitor when you
want to simultaneously watch the
projection image on the monitor.
(See page
36 .)
INPUT 1, 2 terminal
Connecting the computer. (See
pages
27 and 28 .)
Connecting video equipment with
component output terminal (DVD
player, DTV decoder, DVD recorder
with hard disc, etc.). (See page
33 .)
INPUT 3 terminal
Connecting the computer. (See
page
29 .)
Connecting video equipment with
HDMI or DVI output terminal (DVD
player, DTV decoder, DVD recorder
with hard disc, etc.). (See pages
30
and 31 .)
Connections