Sharp XG-PH70X - Manual (Page 89)

Useful Features
-87
Selecting the Transmis-
sion Speed (RS-232C)
Make sure that both the projector and computer
are set for the same baud rate.
Menu operation Page 58
Example: “Options (2)” screen menu
Description of RS-232C
Note
• Refer to the “SETUP MANUAL” contained on
the supplied CD-ROM for RS-232C Specifica-
tions and Command Settings.
• Refer to the computer’s operation manual for
instructions for setting the computer’s baud rate.
Description
Transmission speed is slow.
Transmission speed is rapid.
Selectable items
9600 bps
38400 bps
115200 bps
Direct Power On Function
Menu operation Page 56
Example: “Options (2)” screen menu
Description of Direct Power On
Description
The projector automatically turns on
when the power cord is plugged into
the AC outlet or the breaker switch is
turned on.
The projector is turned on manually
(see page
37 ), and does not turn on
automatically when the power cord is
plugged into the AC outlet or the
breaker switch is turned on.
Selectable items
ON
OFF