Sharp XG-PH70X - Manual (Page 84)

-82
Helpful Functions Set during Installation (“Options (2)” menu)
Setting a Password
••••• There is no factory preset for the password, so
the “Options (2)” menu is enabled.
••••• If you do not want others to operate the “Op-
tions (2)” menu, set a password.
Menu operation Page 58
Example: “Options (2)” screen menu
1
Select “Password” from the “Op-
tions (2)” menu, and press |
| | | |.
2
Press ' ' ' ' ' or " " " " " to set the first digit in
“New Password” and then press | | | | |.
3
Enter the remaining 3 digits and
press
.
4
Enter the same password in “Recon-
firm” and press
.
Info
• The password must be entered to use the
“Options (2)” menu when a password has
been set.
Changing the password
1
Press '
' ' ' ', " " " " " and | | | | | to enter the pass-
word in “Old Password” and press
.
2
Press '
' ' ' ', " " " " " and | | | | | to set the new
password in “New Password” and
press
.
3
Enter the same 4-digit password in
“Reconfirm” and press
.
Note
• If you do not want to set a password, leave the
fields blank in steps 2 and 3 and press .
• To cancel the password settings, press .
If You Forget Your Password
If you forget the password, delete it using the fol-
lowing procedure and set a new password.
Press .