Sharp XG-PH70X - Manual (Page 71)

Useful Features
-69
Special Mode Setting
Ordinarily, the type of input signal is detected and
the correct resolution mode is automatically se-
lected. However, for some signals, the optimal
resolution mode in “Special Modes” on the “Fine
Sync” menu may need to be selected to match
the computer display mode.
Menu operation Page 58
Example: “Fine Sync” screen menu for
INPUT 1 (RGB) mode
Note
• If your computer displays patterns which repeat
every other line (horizontal stripes), flickering
may occur which makes the image hard to see.
• See “Checking the Input Signal” on page 70 for
information on the currently selected input sig-
nal.
Selecting Adjustment Set-
tings
Adjustment settings stored in the projector can
be easily accessed.
Menu operation Page 58
Example: “Fine Sync” screen menu for
INPUT 1 (RGB) mode
Note
• If a memory has not been set, a resolution and
frequency setting will not be displayed.
• When selecting a stored adjustment setting with
“Select Setting”, you can set the projector in the
stored adjustments.